Installing Drum Pendant Light – Drum pendant lights are not a brand new concept in lighting. According to Jim Hoyle Lamp Outlet Shadows and Lights, drum tones were popular through the 1980s before falling in disgrace. Lamp shades battery that can give a warm light strip as you sit on your kitchen table, or provide the means to read your favorite book on your deck chair. You can make your own drum pendant light using only a few items.
Install the drum pendant light kit according to product instructions. Remove the decorative molding at the bottom of the lamp. Race the lamp shade on a piece of white cloth or cream, or any fabric you like to cover light bulbs. Add 1/4 inch around the goal circle around the frame of the lamp shade and then cut the fabric circle with sharp scissors.
Applying the glue on the lower edge of the drum pendant light where the cut is extracted. Press the glued edge of the screen centered on the wrong side of fabric circle so there is a surplus of 1/4 inch on all sides. Press the eaves 1/4 on the edge of the lamp. Let dry completely. Replace the trim on the edge of the lamp shade with glue to cover the edges of the fabric. Place your lamp pendant drum in the kit strapped to the roof and add spotlights. Turn the new drum pendant lamp enjoy attractive and convenient lighting on your table, bed or accountant.
How to Make a Drum Pendant Light
Drum pendant light is not a new concept in lighting, but a return to the 40s and 50s. According to Jim Hoyle of lampshades and lamps Outlet, drum shades were popular in the 1980s before falling out of favor. What’s old is new again, and drum lampshades can give you a warm wave of light as you sit at the kitchen table, or make it possible to read your favorite book on your chaise. Whether you come for a fun, funky, stately and elegant appearance of your home!
Read more instructions make a drum pendant light: 1) Measure the thickness of the drum shade from the top edge to the bottom edge. Take the number you get, and add 4 inches. This is the width of the shade. For example, if your drum shade is 16 inches from top to bottom, add 4 inches to get 20 inches wide. 2) Measure your decorative fabric, and cut it to 20 inches wide. The length can be estimated by wrapping tape around the drum shade and adding 4 inches. This is the length of the shadow. 3) Center the decorative fabric drum shade. There should be two inches above the top edge and 2 inches below the top edge. Hot glue one end of the fabric in the shade. Let the shade to dry completely before proceeding make a drum pendant light to the next step.
12 Installing Drum Pendant Light Photos