Outdoor sensor lights – The yard will then be flooded with bright light, therefore scare intruders. The homeowner will also benefit from the light sensors outdoors. Every time he comes home at night, the lights come on. With the bright lights, you will be less likely to get mugged right in front of his house. You will not be fumbling for your keys your bag either. Outdoor sensor lights are easy to install and operate. For security, the lights can be placed in all areas covering the approach to the house. Lights should also be place in the darkest areas of your property, especially if you live near a wooded area.
Installation outdoor sensor lights, Light sensors are installed outdoors in the same way regular lamps have been installed. The first thing to do would be to turn off the power in the area that will be working on. Use the voltage tester to make sure the power is off. Remove approximately 3/8 inch cable insulation using the wire strippers. Connect the black fixture wire cable with the black box. Use the needle nose pliers to twist together securely. Use a wire nut to cover the wires that have been twisted. Repeat with the white wires.
12 Photos Gallery of: Outdoor Sensor Lights Ideas
To secure cables, cover them with about three inches of duct tape. Place the cables back into the box and use the screws to connect the device. After the device is in place, install new bulbs and turn on the power again. Adjust the outdoor sensor lights settings according to your preference.